Arkadesticks

#1
Tjena alla norrmän!
Mitt namn är Per och jag bor i Sverige. Jag säljer skräddarsydda arkadsticks och har gjort den ända sedan 2003.
Gå in på min sida för mer info:
Min arkadsida

Bilder på ett par av de nya "JPN-Sticks" jag gjort:
http://arkadesticks.com/omed.htm
http://arkadesticks.com/bak.jpg
http://arkadesticks.com/inne.jpg

http://arkadesticks.com/ricksanwa.htm

[attachmentid=51]

Ni bestämmer själv vad ni vill ha för bild på, eget buttonlayout, färg på lådan....ja allt bestämmer ni. Även sanwa flash (optisk joystick) finns att välja.
Jag har även Xbox och Gamecube konvertrar som ni kan köpa till så slipper ni beställa från HongKong eller nått. Jag provar alltid konvertern innan jag skickar så jag vet att allt fungerar.

Ha de gott!
 
#3
Ja, titta gärna närmare ^_^. Och ni får ursäkta om jag inte förstår er helt eller ni inte förstår mig, Svenska och Norska kan vara konstigt ibland :ler: .

Opprinnelig skrevet av Shadar@28.04.2005, 13.14
... dette virker slett ikke dumt.

Skal titte nærmere.
212829​
 
#4
TheRealNeoGeo: Lookin' good!! I'll keep this in mind for sure, but I was wondering.. how much is it for an arcade stick? Max prize and minimum prize? I guess it varies from how much you "style" it?

Anyways, nice work!
 
#5
JINsama
Ska vi ta det på engelska? ok....
You will find the prices on " Priser & info " on the left on the webpage, look at that and you will understand more. Prices are in Swedish krona and if you order then I will put lower value on it so you don`t have to pay so much custom fee`s (tull avgifter).
And all my sticks are made with the finest arcade parts (Sanwa). The stick is 43mm tall and weighs little more than 3Kg.

Opprinnelig skrevet av JINsama@28.04.2005, 14.04
TheRealNeoGeo: Lookin' good!! I'll keep this in mind for sure, but I was wondering.. how much is it for an arcade stick? Max prize and minimum prize? I guess it varies from how much you "style" it?

Anyways, nice work!
212852​
 
#7
TheRealNeoGeo: Sorry my bad, didn't actually check your site before posting. And I decided to write in english to dodge language barriers. :kul:
 
#8
Hi again!
Send the picture you want in eather .psd or .jpg or something. I will print it out here.

Opprinnelig skrevet av Shadar@28.04.2005, 14.19
Final Question: Can I send you an Illustrator EPS or other print formats to custom make my own graphics for the base of the stick?

I'm saving money. My Namco-stick is wearing out.
212867​
 

kakarlsen

Høyere yrkesfaglig
#9
I can see that you are using Sanwa-sticks. Is it possible to buy separate joysticks?
 
#10
Hello.
No sorry, I don`t sell them separate. But if you want a stick then you are more than welcome :D.

Opprinnelig skrevet av kakarlsen@28.04.2005, 20.17
I can see that you are using Sanwa-sticks. Is it possible to buy separate joysticks?
213031​
 

oma

Village Drunk
#11
it wouldent be possible to design it from scrach? where the buttons are placed and stuff? how much can WE design?
 
#13
Hi Oma!
You can:
- choose your own buttonlayout
- choose what color on buttons and ball/bat you want
- choose to have whatever picture on it you want
- choose color on the box
- choose if you want regular sanwa joystick or sanwa flash joystick (optical)


Opprinnelig skrevet av oma@28.04.2005, 22.03
it wouldent be possible to design it from scrach? where the buttons are placed and stuff? how much can WE design?
213136​
 
#14
Endre
Den blåa jpn-sticken har jag sålt till sveriges 3rd strike mästare Omed, hört talas om honom? Han gav den 10/10 i betyg.
1 Maj kan ni gå in på bitterharmony.com och läsa vad de tycker om mina sticks.

Opprinnelig skrevet av Endre@28.04.2005, 22.16
Flyttet og prioritert (helt til noen eventuelt sier at disse stickene ikke er gode eller noe annet negativt :p).
213141​
 
#15
I have a cubejoybox and when i use the ps2 controllers the r2 and l2 buttons has to be pushed extra hard to function, is it like that with some of the buttons on the arcadesticks?
 

Endre

Ødela forumet
#16
TheRealNeoGeo
Du må ikke misforstå, var ikke meningen å virke negativ, synes dette virker som ordentlige sticker. Sier bare at man egentlig aldri vet før en av oss har testet, men emnet ditt er uansett satt som sticky. :tommelopp:
 
#17
Hi Pyro!
It is not like that with the arcadestick I am selling. The reason you have to push so hard is because the converter register them as digital so it will only work if you push all the way down (PS2 controlls have analog pushbuttons). Try using a PSOne dual shock and you will se that you don`t need to push hard at all.

Opprinnelig skrevet av Pyro@28.04.2005, 22.37
I have a cubejoybox and when i use the ps2 controllers the r2 and l2 has to be pushed extra hard to function, is it like that with some of the buttons on the arcadesticks?
213157​
 
#18
Endre
Jag tycker inte heller att du sa det negativt, jag menar bara att mina sticks är bra :).
Tack för att du satte den som sticky :tommelopp:

Opprinnelig skrevet av Endre@28.04.2005, 22.39
TheRealNeoGeo
Du må ikke misforstå, var ikke meningen å virke negativ, synes dette virker som ordentlige sticker. Sier bare at man egentlig aldri vet før en av oss har testet, men emnet ditt er uansett satt som sticky. :tommelopp:
213162​